Panerai LAB-ID Luminor 1950 Carbotech 3-Day PAM 700 Watch

The use of fiction and space materials in high-end watches is always interesting to follow as a bystander, but more appreciated when their actual interests may sometimes be used for watches, you can enjoy a wider segment. Very few cases, but a watch that inspired my interest was the Panerai Replica LAB-ID design 1950 Carbotech 3D PAM 700 (first time). Operating with an array of carbon composites and low friction components without the need for any type of liquid lubrication, the result is a watch that guarantees 50 years of free service operation. There is no way to know that the guarantee will be held, but the limited production is only 50 pieces. I can’t imagine 50 Panerai fans and collectors, also known as “Paneristis”, who don’t want to participate in this long-term experiment and brand.

The Panerai BMG-TECH also revolves around the use of fancy, high-tech materials, Panerai’s LAB-ID to design the 1950 Carbotech 3-Day PAM 700 demo featuring the Laboratorio di concept (LAB-ID), which is Panerai’s The R&D department is located in New York. Some of the previous watches of Cheap Panerai Replica Watches (such as this design submersible 1950), observed using materials called Carbotech service features and aesthetic level. Although I can’t dispute the use of carbon composites, for their mechanical advantage, I can’t help but notice how deep the shadow layer Carbotech merges with the smallest blue luminous dial and crystal Panerai.

With four innovative developments in its caliber P.3001/C, Panerai utilizes a complete tantalum-based ceramic from a set of mainplates and bridges to remove any lubrication needed. This oil-free concept also enters the DLC-coated silicon escapement, which is the second innovation in the list. Third, the ceramics and DLC we see here, Panerai Replica Watches eliminates the need for traditional jewelry. Therefore, a set of four DLC-coated jewels used in sports removes the shock-proof impact system that requires lubrication. Finally, the two main barrels do not have any grease or oil and multilayer coating and the last data link control layer.

Indeed, the concept of low-friction, oil-free watchmaking is not new. As early as 2007, Jaeger-LeCoultre released an extreme laboratory followed by the main compressor extreme laboratory 2, another observation that may not have been lubricated for life. The same can be applied to watches like Cartier ID we have mentioned two concepts before. None of these works is a 50-year guarantee, and Cartier’s concept is still a concept. The JLC aims to attract attention and reflect its “designed” attitude inside and outside. However this Fake Panerai Watches, really isn’t, or look at them from any other, except using blue and other subtle hints. I like to see that you can wear it on the surface for 50 years without any self-awareness about it – if you feel like a Stallone wrist.

Panerai’s LAB-ID design 1950 Carbotech 3-Day PAM 700 case is in a large 49 mm size. Large offsets Carbotech’s lightweight features. It shows a thick layer of carbon fiber composite, which, as I mentioned earlier, produces interesting visual effects with bright blue and dark black tones on the dial. This layered effect is even known for carrying out the crown-protecting device Swiss Panerai Watches. Matte finish is also a nice watch with invisibility and high precision. In addition, it has a water resistance of 100 meters.

Dial, Panerai uses carbon nanotubes to absorb light that strikes any trace on it, resulting in a deep, deep black. The numbers on the blue Super-LumiNova and the markers used in the “sandwich-style” dial for pops on the black tone are also included. It almost reminds me of a single beam that penetrates the mile deep ocean abyss. In general, I think that a clear dial will take into account its high contrast and huge size.

The text “Design, Panerai, LAB-ID” of the crystal itself is printed directly to it, which I think is the watch that some people may find problems with. Because the text is printed to the crystal itself, it will inevitably hinder the hand, which may put some people in the reading time. Personally, I found it to be an interesting solution, and Panerai could not print text on carbon nanotubes for dialing. In addition, the crystal properties of the double antireflective coating.

Looking at this case, we found the deep, dark glory of the caliber P.3001 / C. One of my favorite features is the power reserve indicator, which uses the same blue accent to find the dial. Power reserve for three days and the sport operates at 21600 vph. To facilitate time setting, Panerai includes a second reset function that returns to the 12 o’clock position. This feature seems to be getting more and more popular, definitely something I can appreciate.

Not surprisingly, Panerai’s belt LAB-ID is designed with the 1950 Carbotech 3-Day PAM 700 black and blue solution. The same dark tones found that the entire watch continued to be associated with the blue buckle and the blue contrast stitch.

The use of new materials and the movement of structures to reduce the need for repairs is a regional industry and there is still a long way to go to achieve these technologies in larger and easier, but I think Panerai LAB-ID design 1950 Carbotech 3D PAM 700 Marks an obvious step. If my mathematics is correct, the average cost of regular and secondary services Panerai may add up to about $8,000 for 50 years. This graph waterfall method short proves the price of this watch, there are some areas (for example, magnetization), I am not sure. But, hey, I have a feeling that buyers of this watch may not do this in their heads to prove the cost of mathematics, but enjoy the 50-year commitment to observe and track. Price Panerai LAB-ID designed 1950 Carbotech PAM 700 watch € 50000, three days, it will be limited to only 50 pieces.